Epson EB-PU1008 - Attaching and Removing a Lens

Attaching and Removing a Lens
29
Follow the instructions in these sections to attach or remove a compatible
lens.
Warning
Make sure you turn off the projector and unplug the power cord before attaching
or removing a lens. Otherwise, you may receive an electric shock.
Attention
• If dust or dirt gets inside the projector, projection quality deteriorates and it
could cause a malfunction. Be sure to observe the following precautions when
handling.
• Make sure the front of the projector is not facing up when you attach or
remove the lens.
• Remove the lens only when necessary.
• Store the projector with the lens installed.
• Avoid touching the lens with your bare hands to prevent fingerprints on or
damage to the lens surface.
gg Related Links
• "Attaching a Lens" p.29
• "Removing a Lens" p.33
Attaching a Lens
You can attach a compatible lens to the projector.
a
For information on installing an ultra short-throw zoom lens, see the
User's Guide supplied with the lens.
a
Turn off the projector and unplug the power cord.
b
Pull the lens cover off of the projector.
c
Remove the stopper, if necessary.