Accessing a Networked Projector Using a Web Browser
129
J
Registers or deletes the data for a playlist on the USB flash drive.
e
Select the option corresponding to the projector function you want to
control.
a
• You may need to log in to access some of the options on the
Epson Web Control screen. If you see a log in window, enter
your user name and password.
• When accessing the Basic Control option, the user name is
EPSONREMOTE and the default password is the projector's
serial number.
• When accessing other options, the user name is
EPSONWEB and the default password is the projector's
serial number.
• You can change the password in the projector's Network
menu.
s Network > Network Configuration > Basic > Remote
Password
s Network > Network Configuration > Basic > Web
Control Password
gg Related Links
• "Web Control Options" p.129
Web Control Options
Basic Control (only in normal mode)
Options on the Basic Control screen allow you to select the input source and
control the projector.
a
• If you see a log in window, enter your user name and password. (The
user name is EPSONREMOTE and the default password is the
projector's serial number.)
• You can change the password in the projector's Network menu.
s Network > Network Configuration > Basic > Remote Password
A
Returns to the Epson Web Control screen.
B
Turns the projector on.
C
Selects the input source. (The available sources vary depending on your
projector model.)
D
Turns the video and audio on or off temporarily.
E
Detects the input signal automatically.
F
Turns the projector off.
To Next Page
Loading...
Need help?
General