Settings Menu
82
Lens Lock
s Settings > Lock Setting > Lens Lock
You can disable [Lens Shift], [Zoom], and [Focus] button operations on the
remote control.
Light Source Mode
s Settings > Brightness Settings > Light Source Mode
You can select the brightness for the light source.
Normal
Maximum brightness. This makes the light source operation time
approximately 20,000 hours.
Medium
85% brightness with fan noise louder than Quiet. This makes the light
source operation time approximately 20,000 hours.
Quiet
70% brightness with reduced fan noise. This makes the light source
operation time approximately 20,000 hours.
Extended
70% brightness and extends the life expectancy of the light source. This
makes the light source operation time approximately 30,000 hours.
Custom
You can select a custom brightness level.
a
Setting is only displayed when Constant Brightness is set to Off.
Brightness Level
s Settings > Brightness Settings > Brightness Level
s Extended > Multi-Projection > Screen Matching > Brightness Settings >
Brightness Level
You can select the Custom brightness level you want.
a
Setting is only displayed when Light Source Mode is set to Custom.
Constant Brightness
s Settings > Brightness Settings > Constant Brightness
You can maintain the brightness of the light source set in the Brightness
Level setting.
a
• Setting is only displayed when Light Source Mode is set to Custom.
• When set to On, you cannot change the settings for Light Source
Mode and Brightness Level.
• When set to Off, the Brightness Level setting changes according to
the status of the light source.
Estimated Remains
s Settings > Brightness Settings > Estimated Remains
You can check how long the projector can maintain constant brightness.
a
Setting is only displayed when Constant Brightness is set to On.
gg Related Links
• "Constant Brightness Usage Hours" p.83
• "Light Source Operation Time" p.83
To Next Page
Loading...
Need help?
General