Projector Monitoring and Control Options
125
You can monitor and control the projector over a network in various way.
gg Related Links
• "Epson Projector Management" p.125
• "Epson Web Control" p.125
• "SNMP" p.125
• "ESC/VP21 Commands" p.125
• "ESC/VP.net Commands" p.126
• "PJLink" p.126
• "Art-Net" p.126
• "Crestron Connected Support" p.126
• "Web API" p.127
Epson Projector Management
Epson Projector Management software (Windows only) lets you monitor and
control your projector through the network. See the Epson Projector
Management Operation Guide for instructions.
You can download Epson Projector Management from the following Web
site.
epson.sn
a
The authentication method when registering projectors varies
depending on the version of the Epson Projector Management software
you are using. For the best results, we recommend that you use the
latest version of the Epson Projector Management software.
Epson Web Control
Once you have connected your projector to your network, you can select
projector settings and control projection using a compatible Web browser.
This lets you access the projector remotely.
In Content Playback mode, you can also edit playlists.
a
• You can use the following Web browsers.
• Internet Explorer 11 or later (Windows)
• Microsoft Edge (Windows)
• Safari (Mac, iOS)
• Chrome (Android)
• While using the Web browser, do not connect using a proxy server.
You cannot select all of the projector menu settings or control all
projector functions using a Web browser.
• If you set Standby Mode to Communication On, you can use a Web
browser to select settings and control projection even if the projector
is in standby mode (when the power is off).
s Extended > Standby Mode
gg Related Links
• "Accessing a Networked Projector Using a Web Browser" p.128
SNMP
Network administrators can install SNMP (Simple Network Management
Protocol) software on network computers so they can monitor projectors. If
your network uses this software, you can set up the projector for SNMP
monitoring.
s Network > Network Configuration > Notifications > SNMP
a
• This projector supports SNMP agent version 1 (SNMPv1).
• You cannot monitor projectors using SNMP in the Quick connection
mode.
ESC/VP21 Commands
You can control the projector from an external device using ESC/VP21.
To Next Page
Loading...
Need help?
General