Hazard Distance according to IEC62471-5
188
When using projectors and interchangeable lenses that change to Risk Group
3, no direct exposure to the beam is permitted. Operators must control access
to the beam within the hazard distance or install the product at a height that
will prevent eye exposure within the hazard distance.
Looking into the lens at distances closer than those indicated here can cause
damage to eyesight.
Hazard Distance
Model number EB‑PU2010B/EB‑PU2010W EB‑PU1008B/EB‑PU1008W/EB‑
PU1007B/EB‑PU1007W/EB‑PU
1006W
Lens Wide Tele Wide Tele
ELPLX01 - - 0.077707 -
ELPLX02 0.064472 - - -
ELPLU04 0.144062 0.159626 0.225085 0.255771
ELPLU06 0.107832 0.112244 0.158973 0.168981
ELPLW05 0.174819 0.199180 0.247217 0.287469
ELPLW06 0.290640 0.348411 0.469469 0.559934
ELPLW08 0.193414 0.235421 0.286779 0.348966
ELPLM08 0.279407 0.368156 0.446497 0.587820
ELPLM10 0.747436 1.031958 1.218226 1.652385
ELPLM11 1.139332 1.557715 1.840188 2.484002
ELPLM15 0.427624 0.653690 0.696229 1.045020
ELPLL08 1.673773 1.995392 2.630942 3.116840
EB‑‑PU2010B/EB‑‑PU2010W:
EB‑‑PU1008B/EB‑‑PU1008W/EB‑‑PU1007B/EB‑‑PU1007W/EB‑‑PU1006W:
To Next Page
Loading...
Need help?
General