Epson EB-PU1008 User Manual

Solving Projector or Remote Control Operation Problems
164
• Make sure the Control Communications or Extron XTP setting in the
Extended menu is set to Off if you are using the optional remote control
cable set.
s Extended > HDBaseT > Control Communications
s Extended > HDBaseT > Extron XTP
• If you lose the remote control, you can order another one from Epson.
Solutions to Password Problems
If you cannot enter or remember a password, try the following solutions:
• You may have turned on password protection without first setting a
password. Try entering 0000 using the remote control.
• If you have entered an incorrect password too many times and see a
message displaying a request code, write down the code and contact Epson
for help. Provide the request code and proof of ownership for assistance in
unlocking the projector.
• If you set an Epson Web Control password and forgot the user ID or
password, try entering the following:
• User ID: EPSONWEB
• Default password: the projector's serial number
• If you set a Remote password (in Epson Web Control) and forgot the user
ID or password, try entering the following:
• User ID: EPSONREMOTE
• Default password: the projector's serial number
• If you lose the remote control you cannot enter a password. Order a new
one from Epson.
Solution When "The Battery that Saves Your Clock
Settings is Running Low" Message Appears
If the message "The battery that saves your clock settings is running low." is
displayed, contact Epson for help.

Epson EB-PU1008 Specifications

General

Brand	Epson
Model	EB-PU1008
Category	Projector
Language	English