Epson EB-PU1008 - Lights-Out Control; Reset (Image Menu)

Image Menu
74
Lights-Out Control
s Image > Lights-Out Control
You can set the light source to turn off automatically.
Lights-Out Control
Set to On to automatically turn off the light source when the signal level
falls below the reference level for a set period of time.
Lights-Out Signal Level
Set the brightness level for the video signal being controlled. After turning
off automatically, it turns on immediately when exceeding the specified
image level.
Lights-Out Timer
Set the amount of time before automatically turning off the light source.
Reset (Image menu)
s Image > Reset
You can reset all adjustment values on the Image menu to their default
settings.