Projector Status Display Messages
156
Status Description
Sensor Error A sensor error occurred.
You can check the following status in the Epson Projector
Management software or the Projector Config Tool app.
• Sensor Error 2A(LVR)
• Sensor Error 2B(LVG)
• Sensor Error 2C(LVB)
• Sensor Error 03(PBS)
• Sensor Error 12(PHW)
• Sensor Error 2F(LD1)
• Sensor Error 30(LD2)
• Sensor Error 1D(PS1)
• Sensor Error 0C(PS2)
• Sensor Error 23(PFC)
• Sensor Error 32(PFC2)
• Sensor Error 4B(LDDR1)
• Sensor Error 4C(LDDR2)
• Sensor Error 09(AIR1)
• Sensor Error 38(AIR2)
• Sensor Error 63(RGB-R)
• Sensor Error 64(RGB-B)
• Sensor Error 25(VIC)
• Sensor Error 26(SML)
• Sensor Error 24(HDBT)
• Sensor Error 6F(HDMI)
The device ID number might also be displayed.
Status Description
Internal Error An internal error occurred.
You can check the following status in the Epson Projector
Management software or the Projector Config Tool app.
• Internal Error 01
• Internal Error 02
• Internal Error 03
• Internal Error 12
• Internal Error 0C
• Internal Error 0F
• Internal Error 10
• Internal Error 13
• Internal Error 07
• Internal Error 0A
• Internal Error 14
• Internal Error 11
The device ID number might also be displayed.
Airflow Error A filter airflow error occurred.
Temp Warning A high temperature warning occurred.
Airflow Decline A low airflow error occurred.
Clean Filter An air filter notice occurred; clean the air filter.
Lens Shift Error A lens shift error has occurred.
Lens Error A lens error has occurred.
Laser Error A laser error has occurred.
Laser Warning A laser warning has occurred.
Temp Error FE A laser error has occurred because the laser temperature is
too high.
Temp Warning FE A laser warning has occurred because the laser temperature
is too high.
To Next Page
Loading...
Need help?
General