f
Set according to the certificate to be installed.
g
When you have finished making settings, press Reflect.
a
When installing a certificate, make sure the projector supports its
format.
s
p.58
Secure HTTP Notes
When Secure HTTP in Administrator Settings from the Network menu is
set to On, security using HTTPS protocol is automatically applied. You can
use this function to increase security between the projector and a Web
browser.
A certificate is used in communication using HTTPS protocol to certify
reliability of the server. Create a server certificate to verify reliability from a
Web browser, and install it on the projector.
If there is no server certificate, the projector automatically creates a self-
signed certificate and communicates. Because this self-signed certificate
cannot verify reliability from a Web browser, a warning about the server's
reliability is generated when the projector is accessed from a Web browser.
Although the security level is decreased when compared to a server
certificate, you can continue to communicate by ignoring the warning.
List of supported certificates
Client Certificate (PEAP-TLS/EAP-TLS)
Item Explanation
Supported format
PKCS#12
Network Setup
58
To Next Page
Loading...
Need help?
General
