Epson EMP-X3 User Manual

34
List of Functions
"Signal" Menu
The items that can be set will vary depending on the input source that is currently being projected. Setting details are saved separately for each source.
Sub-menu Function
Auto Setup Selects whether the automatic adjustment function for automatically optimising images when the input source is changed is turned "On" or
"Off". sp.13
Trackingg Adjusts computer images when vertical stripes appear in the images. sp.13
Sync.g Adjusts computer images when flickering, fuzziness or interference appear in the images. sp.14
Position Moves the image display position vertically and horizontally.
Progressive (Adjustment is only possible when composite Video or S-Video signals are being input.)
Off: IP conversion is carried out for each field in the screen. This is ideal for using when viewing images with a large amount of movement.
On: Interlacedg (i) signals are converted into progressiveg (p) signals. This is ideal for using when viewing still images.
Computer
Input (EMP-
X3 only)
Selects the input signal in accordance with the equipment that is connected to the Computer port.
If set to "Auto" the input signal is set automatically in accordance with the connected equipment.
If the colours do not appear correctly when you select "Auto", select the appropriate signal for the connected equipment manually.
Computer1
Input (EMP-
82/62 only)
Selects the input signal in accordance with the equipment that is connected to the Computer1 port.
If set to "Auto" the input signal is set automatically in accordance with the connected equipment.
If the colours do not appear correctly when you select "Auto", select the appropriate signal for the connected equipment manually.
Computer2
Input (EMP-
82/62 only)
Selects the input signal in accordance with the equipment that is connected to the Computer2 port.
If set to "Auto" the input signal is set automatically in accordance with the connected equipment.
If the colours do not appear correctly when you select "Auto", select the appropriate signal for the connected equipment manually.
Computer/RGB video Component videog Composite videog/ S-Videog
Screen shot from EMP-X3 Screen shot from EMP-X3

Epson EMP-X3 Specifications

General

Display resolution	1024 x 768 pixels
Number of colors	16.78 million colors
Vertical scan range	50 - 85 Hz
Horizontal scan range	15 - 92 kHz
Contrast ratio (typical)	400:1
Projector native resolution	XGA (1024x768)
Video in	Mini D-sub 15pin x 1
I/O ports	USB B x1, RCA x 1, Mini DIN, Mini D-sub 15pin
Audio input	RCA x 2
Aspect ratio	4:3
Dimensions (WxDxH)	327 x 246 x 86 mm
Power requirements	100 - 240V ±10%, 50 / 60Hz AC
Lamp type	UHE
Lamp power	170 W
Light source type	Lamp
Service life of light source	2000 h
Noise level	30 dB
Power consumption (typical)	240 W
Operating temperature (T-T)	5 - 35 °C
Market positioning	Home cinema

Weight and Dimensions

Weight	2600 g