Epson EMP-X3 User Manual

6
Part Names and Functions
Front/Top
• Control panel sp.7
• Remote control light-receiving
area sp.i
Receives signals from the remote control.
• Front adjustable foot
sp.iii
Extend and retract to adjust the projection
angle when the projector is placed on a
surface such as a shelf.
• Lens cover
Attach when not using the projector to
prevent the lens from becoming dirty or
damaged.
• Focus ring sp.iii
Adjusts the image focus.
• Foot adjust lever
sp.iii
Pull out the foot lever to extend and
retract the front foot.
• Air exhaust vent
Do not touch the exhaust vent
immediately after projecting, or while
projecting, since it becomes hot.
• Lamp cover sp.59
Open this cover when replacing the
projector's lamp.
• Security lock ( ) sp.69
• Zoom ring sp.iii
Adjusts the image size.

Epson EMP-X3 Specifications

General

Display resolution	1024 x 768 pixels
Number of colors	16.78 million colors
Vertical scan range	50 - 85 Hz
Horizontal scan range	15 - 92 kHz
Contrast ratio (typical)	400:1
Projector native resolution	XGA (1024x768)
Video in	Mini D-sub 15pin x 1
I/O ports	USB B x1, RCA x 1, Mini DIN, Mini D-sub 15pin
Audio input	RCA x 2
Aspect ratio	4:3
Dimensions (WxDxH)	327 x 246 x 86 mm
Power requirements	100 - 240V ±10%, 50 / 60Hz AC
Lamp type	UHE
Lamp power	170 W
Light source type	Lamp
Service life of light source	2000 h
Noise level	30 dB
Power consumption (typical)	240 W
Operating temperature (T-T)	5 - 35 °C
Market positioning	Home cinema

Weight and Dimensions

Weight	2600 g