EasyManuals Logo

Epson EMP-X3 User Manual

Epson EMP-X3
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
39
List of Functions
"Info" Menu
Lets you check the status of the image signals being projected and the status of the projector. (Display only)
Sub-menu Function
Lamp Hours Shows the cumulative lamp operating time.
If it reaches the lamp warning time, the characters are displayed in yellow. The cumulative operating time from 0 to 10 hours will be displayed as
"0H". From "10H" onwards, the display will be in units of 1 hour.
Source Displays the input source which is currently being projected.
Input Signal Displays the input signal settings.
(Does not appear when the input source is composite video or S-video.)
Resolution Displays the input resolution.
(Does not appear when the input source is composite video or S-video.)
Video Signal Shows the video signal format.
(Not displayed for computer, RGB video, or component video images.)
Refresh
Rateg
Displays the refresh rate.
(Does not appear when the input source is composite video or S-video.)
Sync.g Info Information from this menu may be required when you ask for service from your dealer or from the nearest address provided in the
"International Warranty Conditions" section of the Safety Instructions/World Wide Warranty Terms booklet.
(Does not appear when the input source is composite video or S-video.)
Computer/RGB Video/Component videog Composite videog/ S-Videog

Table of Contents

Other manuals for Epson EMP-X3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EMP-X3 and is the answer not in the manual?

Epson EMP-X3 Specifications

General IconGeneral
Display resolution1024 x 768 pixels
Number of colors16.78 million colors
Vertical scan range50 - 85 Hz
Horizontal scan range15 - 92 kHz
Contrast ratio (typical)400:1
Projector native resolutionXGA (1024x768)
Video inMini D-sub 15pin x 1
I/O portsUSB B x1, RCA x 1, Mini DIN, Mini D-sub 15pin
Audio inputRCA x 2
Aspect ratio4:3
Dimensions (WxDxH)327 x 246 x 86 mm
Power requirements100 - 240V ±10%, 50 / 60Hz AC
Lamp typeUHE
Lamp power170 W
Light source typeLamp
Service life of light source2000 h
Noise level30 dB
Power consumption (typical)240 W
Operating temperature (T-T)5 - 35 °C
Market positioningHome cinema
Weight and Dimensions IconWeight and Dimensions
Weight2600 g

Related product manuals