Epson EMP-X3 User Manual

21
Functions for Enhancing Projection
Changing the Aspect Ratio (Resizing)
This function changes the aspect ratiog of images from 4:3 to 16:9 when
component videog, S-Videog, or composite videog images are being
projected.
Images which have been recorded in digital video or onto DVDs can be
viewed in 16:9 wide-screen format.
PROCEDURE
The display is changed whenever you press the button.
Displaying the Pointer (Pointer)
This allows you to move a pointer icon on the projected image, and helps
you draw attention to the area you are talking about.
PROCEDURE
A
Display the pointer.
Each time you press the button the pointer appears or
disappears.
You can also make this setting using the "Resize"
command in the "Signal" menu.
When images in squeeze
mode are projected at 16:9
When images in Squeeze
modeg are projected at 4:3
Remote control
Remote control

Epson EMP-X3 Specifications

General

Display resolution	1024 x 768 pixels
Number of colors	16.78 million colors
Vertical scan range	50 - 85 Hz
Horizontal scan range	15 - 92 kHz
Contrast ratio (typical)	400:1
Projector native resolution	XGA (1024x768)
Video in	Mini D-sub 15pin x 1
I/O ports	USB B x1, RCA x 1, Mini DIN, Mini D-sub 15pin
Audio input	RCA x 2
Aspect ratio	4:3
Dimensions (WxDxH)	327 x 246 x 86 mm
Power requirements	100 - 240V ±10%, 50 / 60Hz AC
Lamp type	UHE
Lamp power	170 W
Light source type	Lamp
Service life of light source	2000 h
Noise level	30 dB
Power consumption (typical)	240 W
Operating temperature (T-T)	5 - 35 °C
Market positioning	Home cinema

Weight and Dimensions

Weight	2600 g