Epson EMP-X3 User Manual

i
English
* Distance from the center of the lens to the base of the screen.
W: Maximum Zoom
T : Minimum Zoom
Setup
Based on the projection distance, choose the best position for your projected image.
The values are only a guide.
Before setting up the projector, make sure you read the separate Safety
Instructions/World-Wide Warranty Terms first.
After making keystone correction, the projected image will be smaller.
Using EMP-X3/82
Operating Range (Left and Right) Operating Range (Up and Down)
Approx.
6m
Approx. 30º
* Distance from the center of the lens to the base of the screen.
W: Maximum Zoom
T : Minimum Zoom
Approx. 30º
Approx. 30º
Approx. 30º
Approx.
6m
Approx.
6m
Approx.
6m
Approx. 15º
Approx. 15º
Approx. 15º
Approx. 15º
Using EMP-62
● Using the remote control ●
Insert the batteries provided.
User’s Guide "Replacing the batteries"
If this unit is not placed parallel to the
screen, the projected image is distorted in
the shape of a keystone.
Do not stand this projector upright.
This may damage your projector.
View from above
Screen

Epson EMP-X3 Specifications

General

Display resolution	1024 x 768 pixels
Number of colors	16.78 million colors
Vertical scan range	50 - 85 Hz
Horizontal scan range	15 - 92 kHz
Contrast ratio (typical)	400:1
Projector native resolution	XGA (1024x768)
Video in	Mini D-sub 15pin x 1
I/O ports	USB B x1, RCA x 1, Mini DIN, Mini D-sub 15pin
Audio input	RCA x 2
Aspect ratio	4:3
Dimensions (WxDxH)	327 x 246 x 86 mm
Power requirements	100 - 240V ±10%, 50 / 60Hz AC
Lamp type	UHE
Lamp power	170 W
Light source type	Lamp
Service life of light source	2000 h
Noise level	30 dB
Power consumption (typical)	240 W
Operating temperature (T-T)	5 - 35 °C
Market positioning	Home cinema

Weight and Dimensions

Weight	2600 g