Epson EMP-X3 User Manual

Appendices
This chapter provides information on maintenance procedures to ensure the best level of performance from the
projector.
Installation........................................................... 56
• Setting Up the Projector .....................................................56
Maintenance ........................................................ 57
• Cleaning ...............................................................................57
•Cleaning the Projector's Surface................................................ 57
•Cleaning the Lens ...................................................................... 57
•Cleaning the Air Filters and Air Intake Vent ............................. 57
• Replacing Consumables......................................................58
•Replacing the batteries............................................................... 58
•Lamp Replacement Period......................................................... 59
•Replacing the Lamp................................................................... 59
•Resetting the Lamp Operating Time.......................................... 62
•Replacing the Air Filter ............................................................. 63
Saving a User's Logo ......................................... 64
Connecting to External Output Equipment ...... 66
• Connecting to an External Monitor...................................66
• Connecting to an external speaker (when using
the EMP-82/62)....................................................................66
Optional Accessories and Consumables ......... 67
•Optional Accessories..................................................................67
•Consumables ..............................................................................67
Glossary............................................................... 68
List of ESC/VP21 Commands............................. 70
• Command List .................................................................... 70
• Cable Layouts ..................................................................... 70
•USB connection..........................................................................70
•Serial connection (EMP-82/62 only)..........................................71
• USB Connection Setup ....................................................... 71
List of Supported Monitor Displays .................. 72
•Computer/RGB Video ................................................................72
•Component Video.......................................................................72
•Composite Video/S-Video..........................................................72
Specifications...................................................... 73
Appearance.......................................................... 76
• EMP-X3............................................................................... 76
• EMP-82/62........................................................................... 77
Index..................................................................... 78

Epson EMP-X3 Specifications

General

Display resolution	1024 x 768 pixels
Number of colors	16.78 million colors
Vertical scan range	50 - 85 Hz
Horizontal scan range	15 - 92 kHz
Contrast ratio (typical)	400:1
Projector native resolution	XGA (1024x768)
Video in	Mini D-sub 15pin x 1
I/O ports	USB B x1, RCA x 1, Mini DIN, Mini D-sub 15pin
Audio input	RCA x 2
Aspect ratio	4:3
Dimensions (WxDxH)	327 x 246 x 86 mm
Power requirements	100 - 240V ±10%, 50 / 60Hz AC
Lamp type	UHE
Lamp power	170 W
Light source type	Lamp
Service life of light source	2000 h
Noise level	30 dB
Power consumption (typical)	240 W
Operating temperature (T-T)	5 - 35 °C
Market positioning	Home cinema

Weight and Dimensions

Weight	2600 g