Epson EMP-X3 User Manual

17
Adjusting the Volume
The volume of the projector's built-in speaker can be adjusted as follows.
PROCEDURE
When the button is pressed to the [ ] side, the volume increases,
and when it is pressed to the [ ] side, the volume decreases.
The volume gauge appears on the screen when the volume is being
adjusted.
•If the value displayed in the gauge on the screen stops
changing when the volume is being adjusted, it
indicates that the limit for volume adjustment has been
reached.
•The volume can also be adjusted using the
configuration menu. sp.36
Using the remote control Using the control panel

Epson EMP-X3 Specifications

General

Display resolution	1024 x 768 pixels
Number of colors	16.78 million colors
Vertical scan range	50 - 85 Hz
Horizontal scan range	15 - 92 kHz
Contrast ratio (typical)	400:1
Projector native resolution	XGA (1024x768)
Video in	Mini D-sub 15pin x 1
I/O ports	USB B x1, RCA x 1, Mini DIN, Mini D-sub 15pin
Audio input	RCA x 2
Aspect ratio	4:3
Dimensions (WxDxH)	327 x 246 x 86 mm
Power requirements	100 - 240V ±10%, 50 / 60Hz AC
Lamp type	UHE
Lamp power	170 W
Light source type	Lamp
Service life of light source	2000 h
Noise level	30 dB
Power consumption (typical)	240 W
Operating temperature (T-T)	5 - 35 °C
Market positioning	Home cinema

Weight and Dimensions

Weight	2600 g