Epson ES-580W - Page 106

❏ Edge Enhancement:
You can enhance the text edges (the border between the text and the background).
When you increase the value, the edges of thin text become black.
Decrease the value if there is too much noise in the scanned image.
❏
reshold
:
You can adjust the borderline for monochrome binary (black or white).
e black areas become larger when you increase the value, and the white areas become larger
when you decrease the value.
❏ Noise reduction level:
You can adjust the level of noise reduction (unnecessary black dots).
e higher the level, the more noise reduction is applied.
Remove Shadow:
Remove the shadows of the original that appear in the scanned image.
❏ Surround:
Remove the shadows at the edge of the original.
Correct Document Skew:
Correct skew in the scanned image.
is feature may not be able to correct documents that have been over skewed.
Skip Blank Pages:
Skip blank pages when scanning if there are any in the originals.
If the result is not what you expected, adjust detection level.
Note:
❏ Some pages may be incorrectly skipped as blank pages.
❏ is feature is not available when scanning double-sided originals that are stitched.
Automatic Feeding Mode:
Set Automatic Feeding Mode. is feature allows you to scan originals automatically when they are
loaded in the ADF. is feature is useful when scanning dierent sizes or types of originals one by
one.
Adjust the edge guides of the scanner before placing each original.
Detect Double Feed:
Display a warning when multiple originals are fed at the same time.
❏ Ultrasonic sensor: Detect a double feed using an ultrasonic sensor.
❏ Length: Detect a double feed by the length. When the length of the second original scanned is
dierent from the rst, this is identied as a double feed.
File Name:
❏ Filename Prex:
Enter a
prex
for the name of the images in alphanumeric characters and symbols.
Scanning > Scanning Using the Scanner's Control Panel > Scanning to a Network Folder
106