❏ Surround:
Remove the shadows at the edge of the original.
Correct Document Skew:
Correct skew in the scanned image.
is feature may not be able to correct documents that have been over skewed.
Skip Blank Pages:
Skip blank pages when scanning if there are any in the originals.
If the result is not what you expected, adjust detection level.
Note:
❏ Some pages may be incorrectly skipped as blank pages.
❏ is feature is not available when scanning double-sided originals that are stitched.
Automatic Feeding Mode:
Set Automatic Feeding Mode. is feature allows you to scan originals automatically when they are
loaded in the ADF. is feature is useful when scanning dierent sizes or types of originals one by
one.
Adjust the edge guides of the scanner before placing each original.
Detect Double Feed:
Display a warning when multiple originals are fed at the same time.
❏ Ultrasonic sensor: Detect a double feed using an ultrasonic sensor.
❏ Length: Detect a double feed by the length. When the length of the second original scanned is
dierent from the rst, this is identied as a double feed.
Clear All Settings
Resets the scan settings to their defaults.
Scanning to a Memory Device
You can save the scanned image to an external USB device.
1.
Place the originals.
2.
Insert a memory device into the scanner's external interface USB port.
3.
Select Memory Device on the home screen of the scanner’s control panel.
Scanning
>
Scanning Using the Scanner's Control Panel
>
Scanning to a Memory Device
114