Epson ES-580W

c
Important:
❏ Do not turn o the computer or the scanner while updating.
1.
Make sure that the scanner and the computer are connected, and the computer is connected to the internet.
2.
Start EPSON Soware Updater, and update the applications or the rmware.
❏ Windows 10
Click the start button, and then select Epson Soware > EPSON Soware Updater.
❏ Windows 8.1/Windows 8
Enter the application name in the search charm, and then select the displayed icon.
❏ Windows 7
Click the start button, and then select All Programs or Programs > Epson Soware > EPSON Soware
Updater.
❏ Mac OS
Select Finder > Go > Applications > Epson
Soware
> EPSON
Soware
Updater.
Note:
If you cannot nd the application you want to update in the list, you cannot update using the EPSON Soware Updater.
Check for the latest versions of the applications on your local Epson website.
http://www.epson.com
Updating the Scanner's Firmware using the Control Panel
If the scanner can be connected to the Internet, you can update the scanner's rmware using the control panel. You
can also set the scanner to regularly check for rmware updates and notify you if any are available.
1.
Select Settings on the home screen.
2.
Select System Administration > Firmware Update > Update.
Note:
Select
Notication
> On to set the scanner to regularly check for available
rmware
updates.
3.
Check the message displayed on the screen and start searching for available updates.
4.
If a message is displayed on the LCD screen informing you that a rmware update is available, follow the on-
screen instructions to start the update.
c
Important:
❏ Do not turn
o
or unplug the scanner until the update is complete; otherwise, the scanner may malfunction.
❏ If the
rmware
update is not completed or is unsuccessful, the scanner does not start up normally and
"Recovery Mode" is displayed on the LCD screen the next time the scanner is turned on. In this situation,
you need to update the rmware again using a computer. Connect the scanner to the computer with a USB
cable. While "Recovery Mode" is displayed on the scanner, you cannot update the
rmware
over a network
connection. On the computer, access your local Epson website, and then download the latest scanner
rmware. See the instructions on the website for the next steps.
Maintenance > Updating Applications and Firmware > Updating the Scanner's Firmware using the Control Panel
150