Epson ES-580W

4.
Slide the edge guides to
t
the edge of the envelopes making sure there are no gaps between the envelopes and
the edge guides. Otherwise, the envelopes may be fed skewed.
Note:
❏ We recommend selecting the appropriate rotation angle or Auto as the Rotate setting in the application.
❏ To scan envelopes, set the appropriate setting in the Epson Scan 2 window.
When you are using Epson ScanSmart, you can open the window by pressing the Settings button > Scanner Settings
tab > Scan Settings.
Select Main Settings tab > Detect Double Feed >
O
. See the Epson Scan 2 help for details.
Detect Double Feed is enabled in the Epson Scan 2 window and a double feed error occurs, remove the envelope
from the ADFand then reload it, tap DFDS Function on the control panel’s screen to set it to On which disables
Detect Double Feed for the next scan, and then scan again. e DFDS Function (Double Feed Detection Skip
function) only disables Detect Double Feed for one sheet.
Related Information
& “Required Settings for Special Originals in Epson Scan 2 Window” on page 124
Mixture of Originals
Specications of Originals that are a Mixture of Dierent Sizes
You can load a mixture of originals from 50.8×50.8 mm (2.0×2.0 in.) to A4 (or Letter) size. You can also load a
mixture of paper types or thickness.
c
Important:
❏ When placing and scanning originals that are a mixture of dierent sizes, originals may be fed askew because
not all of the originals are supported by edge guides.
❏ Originals may be jammed or fed askew if you set dierent types or very dierent sizes of originals, such as in the
following cases.
· in paper and ick paper
· A4 size paper and card size paper
If originals are fed askew, check whether or not the scanned image is available.
Specications of Originals and Placing Originals > Placing Originals > Mixture of Originals
61