Epson ES-580W

❏ Ultrasonic sensor: Detect a double feed using an ultrasonic sensor.
❏ Length: Detect a double feed by the length. When the length of the second original scanned is
dierent from the rst, this is identied as a double feed.
File Name:
❏ Filename Prex:
Enter a prex for the name of the images in alphanumeric characters and symbols.
❏ Add Date:
Add the date to the le name.
❏ Add Time:
Add the time to the
le
name.
Clear All Settings
Resets the scan settings to their defaults.
Scanning Using WSD
Note:
❏ is feature is only available for computers running Windows 10/Windows 8.1/Windows 8.
❏ If you are using Windows 7, you need to setup your computer in advance using this feature.
1.
Place the originals.
2.
Select WSD on the home screen of the scanner’s control panel.
3.
Select a computer.
4.
Tap
x .
Setting Up a WSD Port
is section explains how to set up a WSD port for Windows 7.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
e following conditions must be met to set up a WSD port.
❏ e scanner and the computer are connected to the network.
❏
e
scanner driver is installed on the computer.
1.
Tur n t he scanner on.
2.
Click the start button on the computer, and then click Network.
3.
Right-click the scanner, and then click Install.
Click Continue when the User Account Control screen is displayed.
Scanning > Scanning Using the Scanner's Control Panel > Scanning Using WSD
118