Epson ES-580W - Scanning Originals to an Email

❏ Add Date:
Add the date to the le name.
❏ Add Time:
Add the time to the
le
name.
Clear All Settings
Resets the scan settings to their defaults.
Scanning Originals to an Email
You can send the scanned image by email directly from the scanner. Before scanning, you need to congure the
email server.
You can specify the email address by entering directly, but it may be easier if you register the email address in the
contacts list rst.
Note:
❏ Make sure the scanner’s Date/Time and Time
Dierence
settings are correct. Select Settings > Basic Settings > Date/
Time Settings on the control panel.
❏ You can check destination before scanning. Select Settings > Scanner Settings, and then enable the Conrm Recipient.
1.
Place the originals.
2.
Select Email on the home screen of the scanner’s control panel.
3.
Specify the destination.
❏ To select frequently used addresses: Select the icons displayed on the screen.
❏ To enter the email address manually: Select Keyboard, enter the email address, and then select OK.
❏ To select from the contacts list: Select Contacts, select a contact or a group, and then select Close.
You can search for a contact from the contacts list. Enter the search keyword into the box at the top of the
screen.
❏ To select from the history list: Select History, select a contact, and then select Close.
Scanning > Scanning Using the Scanner's Control Panel > Scanning Originals to an Email
107