Starting on Mac OS
Select Go > Applications > Epson Soware > EPSON Soware Updater.
Application for Conguring Scanner Operations (Web Cong)
Web
Cong
is an application that runs in a web browser, such as Internet Explorer and Safari, on a computer or
smart device. You can
conrm
the scanner status or change the network service and scanner settings. To use the
Web Cong, connect the scanner and the computer or device to the same network.
e following browsers are supported.
Microso
Edge, Internet Explorer 8 or later, Firefox
*
, Chrome
*
, Safari
*
*Use the latest version.
Running Web Cong on a Web Browser
1.
Check the scanner's IP address.
Select Settings > Network Settings > Network Status on the scanner's control panel, and then select the active
connection method status (Wi-Fi Status or Wi-Fi Direct Status) to conrm the scanner's IP address.
2.
Launch a Web browser from a computer or smart device, and then enter the scanner's IP address.
Format:
IPv4: http://the scanner's IP address/
IPv6: http://[the scanner's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Note:
❏ Since the scanner uses a self-signed certicate when accessing HTTPS, a warning is displayed on the browser when
you start Web Cong; this does not indicate a problem and can be safely ignored.
❏ If the administrator password has not been set when accessing Web Cong, you need to set a user name and
password.
c
Important:
Do not forget the user name and the password. If you forget them, you will need to contact Epson service
support.
3.
If you want to change the scanner settings, you need to login as an administrator.
Click Administrator Login at the top-right of the screen. Enter the User Name and Current password, and
then click OK.
Note:
If Administrator Logout is displayed at the top-right of the screen, you have already logged-on as an administrator.
Scanner Basics
>
Information on Applications
>
Application for Conguring Scanner Operations (Web Cong)
26