Epson ES-580W - Updating Firmware Using Web Config; Updating Firmware Without Connecting to the Internet

Updating Firmware Using Web Cong
When the scanner can connect to the Internet, you can update the rmware from Web Cong.
1.
Access Web
Cong
and select the Device Management tab > Firmware Update.
2.
Click Start, and then follow the on-screen instructions.
e rmware conrmation starts, and the rmware information is displayed if the updated rmware exists.
Note:
You can also update the rmware using Epson Device Admin. You can visually conrm the rmware information on the
device list. It is useful when you want to update multiple devices' rmware. See the Epson Device Admin guide or help for
more details.
Related Information
& “Application for Conguring Scanner Operations (Web Cong)” on page 26
Updating Firmware without Connecting to the Internet
You can download the device's rmware from Epson website on the computer, and then connect the device and the
computer by USB cable to update the rmware. If you cannot update over the network, try this method.
Note:
Before updating, make sure that the application Epson ScanSmart is installed on your computer. If Epson ScanSmart is not
installed, install it again.
1.
Check the Epson website for the latest rmware update releases.
http://www.epson.com
❏ If there is the rmware for your scanner, download it and go to the next step.
❏ If there is no rmware information on the website, you are already using the latest rmware.
2.
Connect the computer that contains the downloaded
rmware
to the scanner by USB cable.
3.
Double-click the downloaded .exe le.
Epson Firmware Updater starts.
4.
Follow the on-screen instructions.
Maintenance > Updating Applications and Firmware > Updating Firmware without Connecting to the Internet
151