Epson ES-580W

Open the device manager and keep it, connect the scanner to the computer using a USB cable, and then
conrm
that the device manager's display contents stays unchanged.
Mac OS:
Connect the scanner to the computer using a USB cable, and then conrm that you cannot add the scanner
from Printers & Scanners.
Related Information
& “Running Web Cong on a Web Browser” on page 26
Monitoring a Remote Scanner
Checking Information for a Remote Scanner
You can check the following information of the operating scanner from Status by using Web Cong.
❏ Product Status
Check the status, cloud service, product number, MAC address, etc.
❏ Network Status
Check the information of the network connection status, IP address, DNS server, etc.
❏ Usage Status
Check the rst day of scanning, scanning count, etc.
❏ Hardware Status
Check the status of each function of the scanner.
❏ Panel Snapshot
Displays a snapshot of the screen displayed on the scanner's control panel.
Receiving Email Notications When Events Occur
About Email
Notications
is
is the
notication
function that, when events such as scanning stop and scanner error occur, send the email to
the specied address.
You can register up to ve destinations and set the notication settings for each destination.
To use this function, you need to set up the mail server before setting up notications.
Related Information
& “Conguring a Mail Server” on page 66
Conguring Email Notication
Congure email notication by using Web Cong.
Administrator Information > Monitoring a Remote Scanner > Receiving Email Notications When Events Occur
197