Epson ES-580W

Logging on to the Scanner from a Computer
When you log in to Web Cong as an administrator, you can operate items that are set in the Lock Setting.
1.
Enter the scanner's IP address into a browser to run Web Cong.
2.
Click Administrator Login.
3.
Enter the user name and administrator password in User Name and Current password.
4.
Click OK.
e locked items and Administrator Logout are displayed when being authenticated.
Click Administrator Logout to log o.
Note:
When you select ON for the Device Management tab > Control Panel > Operation Timeout, you log
o
automatically
aer
a
specic
length of time if there is no activity on the control panel.
Related Information
& “Running Web
Cong
on a Web Browser” on page 26
Disabling the External Interface
You can disable the interface that is used to connect the device to the scanner. Make the restriction settings to
restrict scanning other than via network.
Note:
You can also make the restriction settings on the scanner's control panel.
PC Connection via USB : Settings > Basic Settings > PC Connection via USB
1.
Access Web
Cong
and select the Product Security tab > External Interface.
2.
Select Disable on the functions you want to set.
Select Enable when you want to cancel controlling.
PC Connection via USB
You can restrict the usage of the USB connection from the computer. If you want to restrict it, select Disable.
3.
Click OK.
4.
Check that the disabled port cannot be used.
PC Connection via USB
If the driver was installed on the computer
Connect the scanner to the computer using a USB cable, and then conrm that the scanner does not scan.
If the driver was not installed on the computer
Windows:
Administrator Information > Disabling the External Interface
196