Epson ES-580W

10.
Aer
scanning stops, place the next original in the ADF.
Repeat this procedure until you have scanned all originals.
Note:
❏ If you want to scan originals that are detected as double feeds, for example plastic cards or envelopes, skip double
feed detection. On the scanner's control panel, select the Scanner Settings, and then enable DFDS Function before
placing the original.
❏ If you want to scan originals that are likely to jam, for example thin paper, slow down the scanning speed. On the
scanner's control panel, select the Scanner Settings, and then enable Slow before placing the original.
11.
Aer you have scanned all originals, close Automatic Feeding Mode.
Click Finish on the Automatic Feeding Mode window displayed on your computer.
Follow the instructions of the Epson ScanSmart to save the scanned image.
Scanning from Smart Device (Epson Smart Panel)
To scan from your smart device, search for and install Epson Smart Panel from App Store or Google Play.
Note:
Connect the scanner to the smart device before scanning.
1.
Place the original.
2.
Start Epson Smart Panel.
3.
Follow the on-screen instructions to scan.
e scanned image is saved to your smart device, send to cloud service, or send to email.
Scanning > Scanning from Smart Device (Epson Smart Panel)
127