Epson ES-580W - Page 228

Messages Cause/What to do
Private key is required.
Cause:
There is no paired private key with the certicate.
What to do:
❏ If the certicate is the PEM/DER format and it is obtained from a CSR using a
computer, specify the private key
le.
❏ If the certicate is the PKCS#12 format and it is obtained from a CSR using a
computer, create a le that contains the private key.
Cause:
You have re-imported the PEM/DER certicate obtained from a CSR using Web
Cong.
What to do:
If the
certicate
is the PEM/DER format and it is obtained from a CSR using Web
Cong
, you can only import it once.
Setup failed.
Cause:
Cannot nish the conguration because the communication between the scanner
and computer failed or the le cannot be read by some errors.
What to do:
After checking the
specied le
and communication, import the
le
again.
Related Information
& “About Digital Certication” on page 204
Delete a CA-signed
Certicate
by Mistake
There is no backup le for the CA-signed certicate.
If you have the backup
le,
import the
certicate
again.
If you obtain a certicate using a CSR created from Web Cong, you cannot import a deleted certicate again.
Create a CSR and obtain a new certicate.
Related Information
& “Importing a CA-signed
Certicate
” on page 206
& “Deleting a CA-signed Certicate” on page 207
Administrator Information > Advanced Security Settings > Solving Problems for Advanced Security
228