Epson ES-580W - Page 49

3.
Load the laminated cards into the input tray facing down with the top edge facing into the ADF.
Slide the laminated cards into the ADF until they meet resistance.
4.
Slide the edge guides to t the edge of the laminated cards.
Note:
To scan laminated cards, set the appropriate setting in the Epson Scan 2 window.
When you are using Epson ScanSmart, you can open the window by pressing the Settings button > Scanner Settings
tab > Scan Settings.
❏ To increase the accuracy of auto size detection, select the Main Settings tab > Document Size > Settings > Scan
laminated card. See the Epson Scan 2 help for details.
❏ Select the Main Settings tab > Detect Double Feed > O. See the Epson Scan 2 help for details.
If Detect Double Feed is enabled in the Epson Scan 2 window and a double feed error occurs, remove the card from
the ADF and then reload it, tap DFDS Function on the control panel’s screen to set it to On which disables Detect
Double Feed for the next scan, and then scan again. e DFDS Function (Double Feed Detection Skip function)
only disables Detect Double Feed for one sheet.
Specications of Originals and Placing Originals > Placing Originals > Laminated Cards
49