Note:
❏ Ink bottle codes may vary by location. For the correct codes in your area, contact Epson support.
❏ For users in Europe, visit the following website for information on Epson's ink bottle yields.
http://www.epson.eu/pageyield
Related Information
& “Technical Support Web Site” on page 181
Ink Bottle Handling Precautions
Read the following instructions before relling ink.
Handling precautions
❏ Use ink bottles with the correct part code for this printer.
❏ is printer requires careful handling of ink. Ink may splatter when the ink tanks are lled or relled with ink.
If ink gets on your clothes or belongings, it may not come o.
❏ Do not shake too vigorously or squeeze the ink bottles.
❏ Once you open an ink bottle, we recommend using it as soon as possible.
❏ Store ink bottles at normal room temperature and keep them away from direct sunlight.
❏ Epson recommends using the ink bottle before the date printed on the package.
❏ Store the ink bottles in the same environment as the printer.
❏ When storing or transporting an ink bottle, do not tilt the bottle and do not subject it to impacts or temperature
changes. Otherwise, ink may leak even if the cap on the ink bottle is tightened securely. Be sure to keep the ink
bottle upright when tightening the cap, and take precautions to prevent ink from leaking when transporting the
bottle, for example, putting the bottle in a bag.
❏
Aer
bringing an ink bottle inside from a cold storage site, allow it to warm up at room temperature for at least
three hours before using it.
❏ Do not open the ink bottle package until you are ready to ll the ink tank. e ink bottle is vacuum packed to
maintain its reliability. If you leave an ink bottle unpacked for a long time before using it, normal printing may
not be possible.
❏ Prolonged use of the printer when the ink level is below the lower line could damage the printer. Fill the ink
tank to the upper line while the printer is not operating. To display the correct ink level estimates, reset the ink
level
aer
lling
the tank.
❏ To ensure you receive premium print quality and to help protect your print head, a variable ink safety reserve
remains in the ink tank when your printer indicates to rell ink. e yields quoted for you do not include this
reserve.
❏ For optimum print results do not maintain low ink levels for extended periods of time.
❏ Although the ink bottles may contain recycled materials, this does not
aect
printer function or performance.
❏ Specications and appearance of the ink bottle are subject to change without prior notice for improvement.
❏ Quoted yields may vary depending on the images that you are printing, the paper type that you are using, the
frequency of your prints and environmental conditions such as temperature.
User's Guide
Relling Ink and Replacing Maintenance Boxes
112
To Next Page
Loading...
Need help?
General
