Epson L6170 series - Changing the Network Connection to Ethernet from the Control Panel

❏ Setting up from the website
Access the following website, and then enter the product name. Go to Setup, and then start setting up.
http://epson.sn
❏ Setting up using the soware disc (only for the models that come with a soware disc and users with computers
with disc drives.)
Insert the soware disc into the computer, and then follow the on-screen instructions.
Selecting Change the Connection Methods
Follow the on-screen instructions until the following screen is displayed.
Select Change or re-set the connection method on the Select
Soware
Installation screen, and then click Next.
Changing the Network Connection to Ethernet from
the Control Panel
Follow the steps below to change the network connection to Ethernet from Wi-Fi using the control panel.
1. Select Settings on the home screen.
To select an item, move the focus to the item using the
u d l r buttons, and then press the OK button.
2. Select General Settings > Network Settings > Wi r e d L A N S e t u p .
3.
Press the OK button.
4. Connect the printer to a router using an Ethernet cable.
User's Guide
Network Settings
40