9. Close the scanner unit.
10.
Prepare to pack the printer as shown below.
11. Pack the printer in its box using the protective materials.
When you use the printer again, make sure you remove the tape securing the print head. If print quality has
declined the next time you print, clean and align the print head.
Related Information
& “Part Names and Functions” on page 13
& “Checking and Cleaning the Print Head” on page 119
& “Aligning the Print Head” on page 122
Copyright
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of
Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained
herein. Neither is any liability assumed for damages resulting from the use of the information herein. e
information contained herein is designed only for use with this Epson product. Epson is not responsible for any
use of this information as applied to other products.
User's Guide
Appendix
179
To Next Page
Loading...
Need help?
General
