Epson L6170 series - Paper Feeds at a Slant; Several Sheets of Paper Are Fed at a Time; Original Does Not Feed in the ADF; Power and Control Panel Problems

Paper Feeds at a Slant
Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
& “Loading Paper in the Paper Cassette” on page 46
Several Sheets of Paper are Fed at a Time
When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is loaded
in the printer before you reload the paper.
Original Does Not Feed in the ADF
❏ Use originals supported by the ADF.
❏ Load originals in the correct direction, and slide the ADF edge guides against the edges of the originals.
❏ Clean the inside of the ADF.
❏ Do not load originals above the line indicated by the triangle symbol on the ADF.
❏ Check that the ADF icon is on at the bottom of the screen. Press the u or d button to display the icon. If it is
o, place the originals again.
Power and Control Panel Problems
Power Does Not Turn On
❏ Make sure the power cord is securely plugged in.
❏ Hold down the
P button for a little longer.
User's Guide
Solving Problems
145