EasyManuals Logo
Home>Epson>All in One Printer>L6170 series

Epson L6170 series User Manual

Epson L6170 series
186 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
c
Important:
When placing bulky originals such as books, prevent exterior light from shining directly onto the scanner glass.
1. Open the document cover.
2. Remove any dust or stains on the scanner glass.
3. Place the original face-down and slide it to the corner mark.
Note:
A range of 1.5 mm from the bottom edge and right edge of the scanner glass is not scanned.
When originals are placed in the ADF and on the scanner glass, priority is given to the originals in the ADF.
4. Close the cover gently.
c
Important:
Do not apply too much force to the scanner glass or the document cover. Otherwise, they may be damaged.
5. Remove the originals aer scanning.
Note:
If you leave the originals on the scanner glass for a long time, they may stick to the surface of the glass.
User's Guide
Preparing the Printer
53

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson L6170 series and is the answer not in the manual?

Epson L6170 series Specifications

General IconGeneral
BrandEpson
ModelL6170 series
CategoryAll in One Printer
LanguageEnglish

Related product manuals