Epson LightScene EV-100 User Manual

118
• To prevent changes to the User's Logo screen or related display settings, select User's Logo
Protection, press Enter ( ), select On, press Enter ( ) again, and press Esc.
• To prevent changes to network settings, select Network Protection, press Enter ( ), select On,
press Enter ( ) again, and press Esc.
• To prevent changes to the projector's time or schedule settings, select Schedule Protection, press
Enter ( ), select On, press Enter ( ) again, and press Esc.
Note: Be sure to keep the remote control in a safe place; if you lose it, you will not be able to enter the
password required to use the projector.
Parent topic: Adjusting Projector Features
Entering a Password to Use the Projector
If a password is set up and a Power On Protection password is enabled, you see a prompt to enter a
password whenever you turn on the projector.
You must enter the correct password to use the projector.

Epson LightScene EV-100 Specifications

General

Brand	Epson
Model	LightScene EV-100
Category	Projector
Language	English