Epson LightScene EV-100 User Manual

92
4. Select the Projection setting and press Enter ( ).
5. Select a projection mode and press Enter ( ).
6. Press Menu or Esc to exit the menus.
Parent topic: Projection Modes
Related references
Projector Setup Settings - Extended Menu
Turning On Automatic Luminance Adjustment
In the Dynamic color mode, you can turn on the Dynamic Contrast setting to automatically optimize the
image luminance. This improves the image contrast based on the brightness of the content you project.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button.
3. Select the Image menu and press Enter ( ).
4. Select the Dynamic Contrast setting, choose one of the following options, and press Enter ( ):
• Normal to adjust brightness at the standard speed.
• High Speed to adjust brightness as soon as the scene changes.
Note: The Dynamic Contrast setting cannot be adjusted when Multi-Projection is set to On.

Epson LightScene EV-100 Specifications

General

Brand	Epson
Model	LightScene EV-100
Category	Projector
Language	English