80
Shutting Off the Picture and Sound Temporarily
You can temporarily turn off the projected picture and sound if you want to redirect your audience's
attention during a presentation. Any sound or video action continues to run, however, so you cannot
resume projection at the point that you stopped it.
If you want to display an image such as a company logo or picture when the presentation is stopped, you
can set up this feature using the projector's menus.
1. Press the A/V Mute button on the remote control to temporarily stop projection and mute any sound.
2. To turn the picture and sound back on, press A/V Mute again.
Parent topic: Using Basic Projector Features
Related tasks
Saving a User's Logo Image to Display
Remote Control Operation
The remote control lets you control the projector from almost anywhere in the room, up to 23 feet (7 m)
away. You can point it at the front or back of the projector.
To Next Page
Loading...
Need help?
General
