Epson LightScene EV-100 User Manual

29
Attaching and Removing the Cable Clips
You can install the cable clips that came with your projector to provide additional support to the power
cord and HDMI cable.
1. Connect the power cord and HDMI cable to the projector.
2. Insert the end of each cable clip anchor into the cable clip slot above the power inlet and HDMI port
as shown.
1 Cable clip slot
2 Cable clip anchor
3 Power cable clip
4 HDMI cable clip

Epson LightScene EV-100 Specifications

General

Brand	Epson
Model	LightScene EV-100
Category	Projector
Language	English