Epson LightScene EV-100 - Selecting Wireless Network Settings on Mac; Setting up Wireless Network Security

46
Selecting Wireless Network Settings on Mac
Before connecting to the projector, select the correct wireless network on your Mac.
1. Click the AirPort icon on the menu bar at the top of the screen.
2. Make sure AirPort is turned on, then do one of the following:
• If your projector is set up on an existing network (Advanced mode), select the network name
(SSID).
• If your projector is configured for Quick mode, select the projector's SSID.
Parent topic: Wireless Network Projection
Setting Up Wireless Network Security
You can set up security for your projector to use on a wireless network. Set up one of the following
security options to match the settings used on your network:
• WPA2-PSK
• WPA2-EAP*
• WPA/WPA2-PSK*
• WPA/WPA2-EAP*
* Available only in Advanced connection mode.
Note: If you want to set up WPA2-EAP or WAP/WAP2-EAP security, register your digital certificate file
and place it on the SD card you will install in the projector.
1. Press the Menu button.