63
4. Enter one of the following Web APIs to operate the projector:
URL Supported methods Description
http://<ip>/api/v01/contentmgr/remote/power/on GET/POST/PUT Turns the projector on
(WebAPI may not
respond immediately)
http://<ip>/api/v01/contentmgr/remote/power/off 0 to 63 (default is 128)
http://<ip>/api/v01/contentmgr/playlist/play/:id 0 to 7 (default is 0)
http://<ip>/api/v01/contentmgr/playlist/stop 0 to 31 (default is 128)
Note: In the above URLs, enter the IP address for the projector in the <ip> field. For example, a URL
instructing a projector with the IP address 192.168.0.2 to playback playlist ID 3 would look like this:
http://192.168.0.2/api/v01/contentmgr/playlist/play/3
If secure HTTP is enabled, change the http in the URL to https.
Parent topic: Using the Projector on a Network
Related tasks
Controlling a Networked Projector Using a Web Browser
Registering a Digital Certificate on the Projector
Follow the instructions here if you need to install a digital certificate on the projector to provide security
for your presentation files.
Note: You can register a digital certificate over a network. However, be sure to register just once or the
certificate may not install correctly.
Importing a Web Server Certificate Using the Projector Menus
Registering Digital Certificates from a Web Browser
Digital Certificate Types
Parent topic: Using the Projector on a Network
Importing a Web Server Certificate Using the Projector Menus
You can create your web server certificate and import it using the projector menus and an SD card.
To Next Page
Loading...
Need help?
General
