144
Setting Options Description
Light Source
Calibration
Run Now
Run Periodically
Schedule Settings
Schedules Light Source Calibration to correct the
white balance of the light source
Run Now: starts Light Source Calibration
immediately
Note: You cannot use the Run Now function within
20 minutes of turning on the projector or when the
environmental temperature is high and light source
brightness is automatically reduced
Run Periodically: starts Light Source Calibration
after every 100 hours of use
Schedule Settings: displays the schedule settings
screen so you can schedule Light Source
Calibration to run periodically
Note: Light Source Calibration runs automatically
after every 100 hours of use only if the projector is
turned off. If the projector is on continuously for
more than 24 hours, or when direct shutdown is
used regularly, select Run Now or set a schedule to
adjust this setting
You cannot reset the following settings using the Reset All Config option:
• User's Logo
• Color Uniformity
• Color Matching
• Language
• Date & Time
• Network menu items (Wireless LAN Power)
• Operation Hours
• Light Source Info
Parent topic: Adjusting the Menu Settings
To Next Page
Loading...
Need help?
General
