Epson LightScene EV-100 User Manual

153
On/Standby
light
Status light Laser light Temp light Status and solution
Blue Varies Varies Flashing
orange
Projector is too hot.
• Make sure that the vents are not
clogged with dust or obstructed by
nearby objects.
• Make sure the environmental
temperature is not too hot.
• If the problem persists, unplug the
projector and contact Epson for
help.
Flashing blue Varies Flashing
orange
Varies Laser warning. Turn the projector off,
unplug it, and contact Epson for help.
Wireless LAN light Status and solution
Blue Wireless LAN is available.
Flashing blue quickly Connecting to device.
Flashing blue slowly An error has occurred. Turn the projector off and back on again.
Off Wireless LAN is unavailable. Make sure the wireless LAN settings are
correct.
Note: If the lights display a pattern not listed in the tables above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Related references
Projector Setup Settings - Extended Menu
Where to Get Help
Related tasks
Cleaning the Air Vents
Cleaning the Lens
Turning Off the Projector

Epson LightScene EV-100 Specifications

General

Brand	Epson
Model	LightScene EV-100
Category	Projector
Language	English