102
Related references
Image Quality Settings - Image Menu
Changing the Image Aspect Ratio
You can change the aspect ratio of the displayed image to resize it.
Note: For HDMI sources, the input signal determines the image's aspect ratio.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button.
3. Select the Signal menu and press Enter.
4. Select Aspect and press Enter.
5. Select the aspect ratio you want to use for your input signal and press Enter.
6. Press Menu or Esc to exit the menus.
Parent topic: Image Aspect Ratio
Related references
Input Signal Settings - Signal Menu
To Next Page
Loading...
Need help?
General
