Epson LightScene EV-110 - Connecting to an HDMI Video Source; Connecting to a Streaming Media Player

33
Related references
Projector Setup Settings - Extended Menu
Connecting to an HDMI Video Source
If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable.
The HDMI connection provides the best image quality.
Note: Do not turn on the video source before connecting it to the projector. Doing so could damage the
projector.
1. Connect the HDMI cable to your video source's HDMI output port.
2. Connect the other end to the projector's HDMI port.
Note: The projector converts the digital audio signal sent from your video source into a stereo analog
signal if you are connecting to external speakers.
Parent topic: Setting Up the Projector
Connecting to a Streaming Media Player
You can connect a streaming media player to the projector's HDMI port. Connect the USB cable to
power the streaming media player from the projector.
Note: To continue supplying power to the streaming media player when the projector is not projecting
images, select Always On/On as the DC Out/GPI In setting in the Extended menu.