119
2. Press the Pattern button on the remote control.
3. Press the left and right arrow buttons on the remote control to select a pattern from the displayed list.
4. Press Esc to clear the test pattern.
Parent topic: Adjusting Projector Features
Selecting a Test Pattern Using the Menus
You can display a test pattern to aid in adjusting the projection status without connecting video
equipment.
1. Turn on the projector and display an image.
2. Press the Menu button on the remote control, select the Settings menu, and press Enter.
3. Select the Test Pattern setting and press Enter.
To Next Page
Loading...
Need help?
General
