80
You see a screen like this:
5. Select the Date & Time setting and press Enter.
6. Select your date and time settings. Then select Set and press Enter to confirm your changes.
7. When you are finished, press the Menu button to exit.
Parent topic: Using Basic Projector Features
Image Shape
You can project an evenly rectangular image by placing the projector directly in front of the center of the
screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off
to the side, you may need to correct the image shape for the best display quality.
Correcting Image Shape with H/V Keystone
Correcting Image Shape with Quick Corner
Parent topic: Using Basic Projector Features
To Next Page
Loading...
Need help?
General
