155
Related tasks
Selecting Password Security Types
Projector Information Display - Info Menu
You can display information about the projector and input sources by viewing the Info menu. However,
you cannot change any settings in the menu.
Select Light Source Info to display the projector's light source information. Select Version to display
the projector's firmware version. Select Temp Warning Info to display the projector's high temperature
warnings. Select Power On/Off History to display the projector's power on and off history. Select
Projector Info to display the settings described below.
Information item Description
Operation Hours Displays the number of hours (H) the projector has been used since
it was turned on
Source Displays the name of the port to which the current input source is
connected
Input Signal Displays the input signal setting of the current input source
Resolution Displays the resolution of the current input source
Refresh Rate Displays the refresh rate of the current input source
Sync Info Displays information that may be needed by a service technician
To Next Page
Loading...
Need help?
General
