38
Connecting to External Speakers
To play the sound from your presentation, you can connect the projector to external self-powered
speakers. You can control the volume using the projector's remote control.
You can also connect the projector to an amplifier with speakers.
Warning: Do not connect headphones to the projector; the excessive sound pressure may damage your
hearing.
1. Make sure your computer or video source is connected to the projector with an HDMI cable.
2. Locate the appropriate cable to connect your external speakers, such as a stereo mini-jack-to-pin-
jack cable, or another type of cable or adapter.
3. Connect one end of the cable to your external speakers as necessary.
4. Connect the stereo mini-jack end of the cable to your projector's Audio Out port.
Parent topic: Setting Up the Projector
Related references
Projector Setup Settings - Extended Menu
Related tasks
Adjusting the Projector's Brightness Level
To Next Page
Loading...
Need help?
General
