145
Setting Options Description
Remote Receiver On
Off
Turns off reception of remote
control signals by the receiver
To reset this setting to On, press
and hold the Menu button quickly
using the remote for about 15
seconds.
User Button Light Source Mode
Multi-Projection
Info
Display the QR Code
Messages
Brightness Level
Assigns one of the menu
functions to the User button on
the remote control for one-touch
access
Test Pattern — Displays a test pattern to assist in
focusing and zooming the image
and correcting image shape
Content Playback Overlay Effect
SD Viewer
Selects playlists and effects for
projection
Overlay Effect: select On to
apply Color Filter, Lightness,
and Shape Filter settings
Note: Overlay Effect cannot be
set when Edge Blending is set
to On, when the source is the SD
memory slot and a non-writable
error has occurred, or when the
source is an SD player and the
playlist cannot be played.
SD Viewer: select a playlist from
the SD card
To Next Page
Loading...
Need help?
General
