168
On/Standby
light
Status light Laser light Temp light Status and solution
Varies Flashing blue Flashing
orange
Varies Refresh Mode is on. Press any button
to turn Refresh Mode off.
Off Flashing blue Flashing
orange
Off Internal projector error. Turn the
projector off, unplug it, and contact
Epson for help.
Off Flashing blue Off Flashing
orange
A fan or sensor has a problem. Turn
the projector off, unplug it, and
contact Epson for help.
Off Flashing blue Off Orange Projector has overheated and turned
off. Leave it turned off to cool down.
After about five minutes, do the
following:
• Make sure that the vents are not
clogged with dust or obstructed by
nearby objects.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug the
projector and contact Epson for
help.
Off Flashing blue Orange Off Laser has a problem.
• Make sure that the vents are not
clogged with dust or obstructed by
nearby objects.
• If the problem persists, unplug the
projector and contact Epson for
help.
To Next Page
Loading...
Need help?
General
